Troubleshooting

Click on the possible problem you may be experiencing below to reveal a solution. If you cannot find an answer contact your local INCOE Representative.

 
Gate Freezing
 
Single Nozzle Freezing at Rear Head
 
Gate Cap Broken
 
Gate Cap Leakage
 
Nozzle Does Not Attain Set Point
 
Single Nozzle Cracks at Nozzle Head
 
Gate is Dripping, Drooling or Stringing
 
Cap Front is Sticking
 
Gate Vestige Too Long (ST/CT)
 
Burn Marks on Molded Part
 
Color Marks on Molded Part
 
Leakage Between Nozzles and Manifold, or on Extension Nozzle
 
Extension nozzle freezing
 
Set Point Temperature Variation
 
Threads Do Not Move
 
Burned Material in Channels
 
Valve Pin Does Not Move
 
Gate Sticking
 
Gate Not Closing Well
 
Cylinder Locking Nut becomes Loose
 
Valve Pin Leakage - Adjustable Type
 
Valve Pin Leakage - Non Adjustable Type
 
Valve Pin Leakage - Oil Leakage
 
Site Map Contact Patents