DF Gold systems are designed from years of in field processing experience offering increased hot runner performance and robustness while maximizing molder up-time. Applications include Automotive, Aerospace, Closures, Medical, Pharmaceutical, Appliance, Technical and Electronics parts.
Thermal Tip, Open, Sprue and Valve.
INCOE® nozzle designs offer 2 types of mounting onto the manifold system based on your application.
|
|
|
DFQ style |
|
|
DFX style |
|
|
|
Nozzles have a threaded base
which screws directly into the manifold. This ensures a secure, leak proof connection to the manifold and facilitates construction of our Unitized systems. |
|
|
Utilizes a compression fit onto the manifold. Mold back and retainer plates secure the entire system in place. |
Typical in large part applications requiring longer lengths, INCOE®’s multi zone nozzles use separate multiple heaters to ensure the heat profile can be precisely controlled. Available on our DF8 – DF25 series, these multi zone nozzles provide optimal thermal control over the entire length of the nozzle.
INCOE® nozzles are equipped with twin heater technology. Heating elements are connected in parallel to a single set of leads from the heaters. If one element burns out, the redundant heater continues seamless operation until routine maintenance can be performed.
The DF Gold nozzle types process from <110g up to 9000g shot weights.
| Nozzles |
Shot Ranges |
| DF5 (5 mm channel) |
<110g |
| DF8 (8 mm channel) |
30-675g |
| DF12 (12 mm channel) |
140-2000g |
| DF18 (18 mm channel) |
420-3500g |
| DF25 (25 mm channel) |
900-9000g |
And is ideal in the following industries / applications: