INCOE®’s DF3 series systems are specifically designed for the micro / small part applications (0.1g to 20g) including high cavitation common in the pharmaceutical, medical, and technical markets. With its compact design, DF3 is also suited for close center applications featuring a minimum pitch of 19mm. This allows for a reduced mold base and smaller machine size, yielding a cost effective molding operation.
Thermal Tip, Open, Control Gate. Multi Tip-DMT-3 offers 2 points as close as 6mm, and up to 6 points on a 12mm circle.
INCOE® DF3 nozzles utilize our threaded DFQ threaded base. DMT nozzles utilize our compression fit DFX base.
Micro molded parts use the DF3 or DMT-3 Multi Tip type of nozzles with <20g shot weight.
Nozzles
|
Shot Ranges |
DF3 ( 3 mm channel)
|
<20g |
DMT-3 (3 mm channel)
|
<20g |