These INCOE® systems combine plates and hot runner system components for reduced installation time in the mold.
INCOE® hot halves are fully assembled, plumbed, wired and pre-tested for functionality prior to leaving our manufacturing facilities. INCOE® hot halves are ready for assembly to the cavity plate at the mold manufacturer, reducing delivery time to your customer.
DF GOLD Systems can utilize either our threaded DFQ nozzles, or our compression fit DFX nozzles.
The Quick-Flo™ (QF) nozzle design utilizes a compression fit onto the manifold. The mold retainer and back plates secure the entire system into the injection half.
6 nozzle types process from <20g up to 9000g shot weights. Nozzles are identified by runner/ channel sized in mm as follows:
| DF3 (3mm channel) |
<20 |
| DF5 (5mm channel) |
<110g |
| DF8 (8mm channel) |
30-675g |
| DF12 (12mm channel) |
140-2000g |
| DF18 (18mm channel) |
420-3500g |
| DF25 (25mm channel) |
900-9000g |
3 nozzle types processing up to 375g shot weights. Nozzles are identified by runner/ channel sized in mm as follows:
| QF3 (3mm channel) |
3-12g |
| QF5 (5mm channel) |
7-65g |
| QF8 (8mm channel) |
30-375g |
INCOE® Hot Half Packages are ideal for the following Industries / Applications: